Adapter ESATTO 2" for SkyWatcher/Orion ED80, ED100 and ED120
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. By adding this adapter to ESATTO, your new focuser will have the same thickness of the standard one. Based on the camera and accessories you want to connect, you may need extenders to reach the focus with your camera.
Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you easily reach prime focus. More, this adapter has the holes for tube installation that correspond to the original ones so it is not necessary to make new holes on the optical tubes. This adapter has screws for adjusting focuser's orthogonality with respect to the optical axis of the telescope in order to perfectly adjust ESATTO to your telescope.
Adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f4 and f5
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 200 f4 and f5 reflectors for astrophotography, this adapter allows you to connect ESATTO 2" to these telescopes. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you easily reach prime focus. More, this adapter has the holes for tube installation that correspond to the original ones so it is not necessary to make new holes on the optical tubes. This adapter has screws for adjusting focuser's orthogonality with respect to the optical axis of the telescope in order to perfectly adjust ESATTO to your telescope.
Adapter ESATTO 2" for Takahashi FS-60Q
If you are searching for the most precise motorized focuser for Takahashi FS-60Q, this adapter allows you to connect ESATTO 2" to this telescope. Optical thickness is 5mm. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your camera.
Adapter ESATTO 2" for GSO/Orion/TPO Ritchey-Chretien 6 and 8 inches
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 152mm f/9 or 203mm f/8 (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. You can use the standard extensions that come with the RC telescope in order to install the focuser at a precise distance from the OTA. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your camera.
Adapter ESATTO 2" for Takahashi telescopes with M72 thread
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus. By adding the M71/M72 adapter, you can connect it also to the Takahashi Mewlon telescopes.
Adapter ESATTO 2" for telescopes with SC thread
Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8” and 9.25” Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus, avoiding focus shift and mirror flop by leaving the primary mirror locked (if locks are available). The low profile of the ESATTO leaves you enough back focus to use the the EdgeHD or other SC threaded focal reducers.
Adapter ESATTO 2" for telescopes with large 3.3" SC thread
SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD .7x focal reducers for 925, 1100 and 1400 models.
Adapter ESATTO 2" for Borg 55FL f3.6
This adapter allows you so use the ESATTO 2" robotic microfocuser with the Borg 55mm fluorite lens and 7880 reducer to create the Borg 55FL f3.6 astrograph. This set is composed by 5 rings and adapters and, in order to complete the Borg 55FL f3.6 astrograph, you have to add the Borg 2555 55FL lens, Borg 7880 0,8x reducer for 55FL and Borg 7352 rotator.
At The Widescreen Centre, we prioritize prompt order processing and dispatch. We strive to dispatch all orders on the same day or the next working day, depending on the time of your order. We hold extensive stocks to ensure that your items are ready for immediate despatch. Please note that the cut-off time for same-day dispatch is usually 1:30 p.m.
For delivery within Mainland UK, we use reputable couriers to provide efficient service. You can expect your package to arrive in 1-2 working days. Please note that a signature may be required upon delivery to ensure a secure receipt.
In the case of special order items, the delivery time may be longer. If you have any concerns or questions about the delivery of your item, please don't hesitate to Contact Us. We are here to assist you.
Should there be any delay in dispatching your order, we will notify you to keep you informed.
Please be aware that The Widescreen Centre cannot be held responsible for any postal or third-party delays that may occur. We are committed to providing a reliable and efficient delivery service for our valued customers.
For more information please click here
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
